Mikrotik bandwidth test exe

Please review the TCP protocol for details on its internal speed settings and how to analyze its behavior. Statistics for throughput are calculated using the entire size of the TCP data stream. As acknowledgments are an internal working of TCP, their size and usage of the link are not included in the throughput statistics. CZFan Forum Guru. Kind regards from South Africa. Screenshot from NetHorror just joined. VPN tunnel test anyone? Tested with windows Mikrotik bandwidth test util v0.

Here are the results of my test: [img] btest. Rather than type the answer to your question, I just made some image snapshots. Is this what you was asking for? North Idaho Tom Jones btest-user.

Are you behind a firewall? Is your test device on a live IP address? Anybody want to donate a Mikrotik with a gig port to replace my x86 bit I would like to find a hardware solution Mikrotik something that can btest up to near gig or at least 4-gig. This may be starting to sound more complex to configure than the time you may want to invest just to be able to perform a btest to-and-from my Then you should be able to perform UDP btests in both directions - and it may give you more control over what your network is doing.

Jeroen Member Candidate. I've been able to test both my connections. When just doing a speedtest on speedtest. Also you might want to try and verify you can ping BTW, grew up in the Panhandle up near Murray. It is a great alternative to speedtest. I hope you can keep it running despite its increasing notoriety. Note to other testers: Windows v0. It should be avoided for any realistic figures. RonJohn63 newbie. Code: Select all.

Firstly: Many thanks for providing this very useful btest facility. We experienced the VMware host would "Pink Screen of Death" complaining about the Network card approx once every 6 weeks approx. We gave up and moved to CHR Single core limitation. Hey - thanks for the feedback.

I am very interested in possibly changing the I know that btest only uses 1 CPU when there are multi-cores available. Thus a btest server comes down to CPU clock speed to function well as a btest server. So - I would like to ask you a favor please On any of your Mikrotik platforms with gig Ethernet, what do you get when you do a UDP btest to If I can find something that cat run at or near gig, I want to try to switch the Makoto newbie.

I did try few times last couple of days but never able to connect! It would be so cool if Mikrotik has someting like that for at least Mbit test:! In a few days I am geting new dedicate line I whill try then!

I can try again later. HumanDamned newbie. Try a speedtest. UDP should be faster. Yarisken just joined. Working great here. Could you kindly confirm if it's running? Request timed out. On the mikrotik it returns the error "can't connect". This is across all versions of x86 ROS for the last year. If you can not ping or btest to this server, it is This btest server sometimes has to be reset up to 3 times a day.

I can only hope that CHR or anything else is better at faster than gig btest speeds. Is it the x86 ROS virtual machine or is the whole physical server crashing under the load? If you have white box "home made" computer , please post motherboard name, BIOS version. Ideally in both cases, screenshots of BIOS settings would be great.

I'm running virtualized x86 ROSes with It is now a CHR bit system. So far it appears to have the same throughput capabilities. A local btest to the loopback There is still a simple-queue which limits peak testing to 3. You are welcome to hammer away on it. I can only guess that the paravirtulized gig network card drivers "vmxnet3" are working correctly.

This is not a problem. I just happened to look at who was connected to the My question for you, what kind of throughput and processing ability are you able to get with AWS? I have same issue with UDP Receving like some other in this thread.

Of course I could allow my btest IPs but in my opinion this should be covered by the connection tracking. I cannot connect today, nor can't ping it, this is my traceroute: but using ping.

It will remain turned off until mid next week. Example: - Where somebody connected up to my This would be great for both client and server in btest. One of the potential issues I often see with my This can force the simple-queue to kick in after a few minutes and then slow down everything to what ever I have my simple-queue set for.

When this happens, a second remote person wanting to also run a btest to my server may not be able to connect or get slower-than-normal results - or possibly not able to run a btest at all. It's OK to use - but please don't do lengthy tests. Recently I've had some tests that have lasted for several hours or more.

I hope everybody had a good holiday - and will have a good New Years. Thank you for the public btest site. I have run a few tests with a dslreports. Not Mikrotik related but just in general with high speed links. Some live Linux examples do better but anything above a few gigabit seem less reliable.

I am into tuning process queues on the intel nic. I have tested a variety of settings in the ccr and the hp switch. So far rss on the nic and buffer size seem to have the most impact on a single host.

I have a number of servers and to the best of my testing tengb is great in aggregate. Although I dare to get the best desktop test yet. It has proven to be a most reliable tool whether we use it for debug or just rate checking. On average, since original activation in January - The btest traffic averages out to the equivalent amount of data transferred as a sustained 40 meg load yearly total average. I think this information helps everybody. Somebody commented "The day the Internet died.

I am glad you gave the chance to chr as I suggested even you were not believe in it originally. Happy new year to you and all over the world!

And please, do not copy one reply over dozen of threads. It was not nice from you Normally people would stay in there if they would like to reply so you could effectively join all the open topics to one which continues further. But never mind - just a sidenote. I have limited the CHR to 50 concurrent sessions. Host: btest. Boter Frequent Visitor.

I cant find icon to give the reputation. Here are a few examples of the results of the test bandwidth link between routers Mikrotik with Mbps 1Gbps. Noteworthy on the use Mikrotik Test Bandwidth is bandwidth test this takes a lot of resources, especially CPU resources.

Bandwidth test results up only So the result of the bandwidth test is not optimal. Keep in mind that not all types of Mikrotik able to handle traffic generated 1Gbps, so need to be checked also Mikrotik CPU resources when we try bandwidth test. Therefore, it is advisable not to perform some tests to one Mikrotik bandwidth simultaneously. To limit how many sessions that can be used to test the bandwidth at the same time we can use the parameter Max Session.

Please download the application btest. The test result is as follows:. Bandwidth Test Server Mikrotik. We can also make your own settings on the Mikrotik Bandwidth Test Server. There are several parameters that can be used. Enabled: used to enable bandwidth test server on the router.

Bandwidth Test Client Mikrotik. In this proxy client bandwidth test, there are some parameters that can be set in the proxy bandwidth test. Direction: used to determine the direction of the traffic. There is 3 options direction of the traffic that will be generated:. Local and Remote Tx Tx Speed Speed: used to determine the speed of the current transfer bandwidth test.

Unit bps bits per second. Try ping test its first inter-proxy, make sure it can.